Products: SUPERflex™, EasyFix™ ClipTrack™ and therM®
It’s always good to get a recommendation. These new clients in Somerset had heard about us from a friend, who had one of our systems installed 10 years ago. Based on their friend’s experience, they decided to ask us to quote for a system for their new extension.
The clients couldn’t figure out how to attach the pipework to the floor. Their insulation had gone under the concrete slab, and they then had to build up by 50mm to be able to lay their finished floor.
We suggested that the clients used our EasyFix™ ClipTrack™ system. These strips of plastic have a self-adhesive backing which will bond to most surfaces. They are 1m in length and have cups to hold the pipework at 5cm intervals, making installation very easy.
No matter what your pipe centres are, the EasyFix™ ClipTrack™ system ensures that measuring is easy, and helps you keep all the pipework nice and straight.
Aside from the kitchen island which we had to work round, it was a straight forward installation. The clients were delighted, as they thought they might have toresort to radiators or an over-floor system. The screed-based system we designed for them met all their needs, while costing less than an over-floor solution.
“We’ll be sure to recommend you to all our friends in the future.”
Because the kitchen and dining area in the new extension have a sleek, modern design, the clients opted for our app-controlled thermostat, the therM. This kept the room’s contemporary looks, while giving them superb control over their heating.
The clients were thrilled with both the system and the service, just as their friends had been 10 years ago.
One of the easiest to install underfloor heating systems. Suitable for new builds and renovations where a new screed floor is being laid.
Where a floor deck is supported by timber or engineered joists, can be a headache to install underfloor heating but our systems make the job easy.
Offering a minimal height increase to install underfloor heating above where a floor has already been laid.
Take a look at SlimFix®