Product: Adaptable UFH system
Over the years, Continental Underfloor has seen many types of different systems designed and installed, adding to our team's portfolio of knowledge and experience.
Sometimes, the customer isn't sure what their final heat source will be before the underfloor needs to be installed. On this particular project in the Highlands, the customer was thinking about installing a heat pump in a few years' time, so he needed to future-proof the system.
This is an important consideration because the design of a low temperature heat source is vastly different that of a high flow temperature heat source.
A lower operating temperature would mean greater efficiency, so the client would potentially save money on running his holiday cottages.
Heat pumps work really well with underfloor heating thanks to their lower operating temperatures. If a customer were to decide on radiators with a heat pump, it would mean installing unsightly units on the wall because they'd need a larger surface area to compensate for the reduced temperature.
Our expert Technical Sales Adviser suggested future-proofing the system to allow for a possible heat pump, but to still retain a workable underfloor heating system based on the higher flow temperature. They also recommended using floor limit sensors to help protect the screed from overheating - really reassuring for the absentee owner.
If you haven't decided on a heat source yet, don't fret. You can future-proof the design of the system to keep your options open.
Combined with our tamper-proof thermostats, this was an ideal solution. The customer was delighted.
"Our own personal adviser not only offered me exactly what I wanted but explained precisely how it worked and how it would be fitted… The service was second-to-none."
The customer also needed a quick turnaround. The quote was back the same day, the pipe layout designed within 24 hours, and the whole process from start to finish took less than a week. We had a system quoted, designed and delivered quicker than you can say "Continental Underfloor Heating".
You don't get service like that every day.
One of the easiest to install underfloor heating systems. Suitable for new builds and renovations where a new screed floor is being laid.
Where a floor deck is supported by timber or engineered joists, can be a headache to install underfloor heating but our systems make the job easy.
Offering a minimal height increase (from 15mm) to install underfloor heating above where a floor has already been laid.